CODELOCKS 5OOO ELECTRONIC Bedienungsanleitung PDF herunterladen (Seite 26)

185mm

/4”)

110mm

/16”)

58mm

/16”)

58mm

/16”)

235mm

/8”)

55mm

/16”)

84mm

/16”)

72mm

/8”)

25mm

(1”)

Front depth off door: 90mm (3

/2”)

60mm

/8”)

58mm

/16”)

Codelocks CL600 Range

Technical Speciﬁcations

Door thickness 35mm - 65mm (1

/8”-2

/2”)

Spindle type 2 part 8mm (

/16”) spring loaded

spindle

Body material Zinc alloy

Non handed Lock will ﬁt doors hung on the

left or right

Mortice Latch (CL610 & CL615)

Medium duty, stainless steel latchbolt head with

“anti” shim deadlocking plunger, 8mm (

/16”)

follower.

60mm (2

/8”) backset, requires 25mm (1”) hole,

82mm (3

/4”) deep.

70mm (2

/4”) backset, requires 25mm (1”) hole,

92mm (3

/16”) deep.

Mortice Lock (CL620 & CL625)

Euro proﬁle mortice sash lock with deadbolt

and latchbolt. Complete with double cylinder

to control deadbolt and to retract latchbolt.

With the deadbolt locked it denies access to a

code user. The key can be used to open doors

for management functions such as security

and cleaning. The split follower enables the

inside lever to retract the deadbolt and latch to

prevent accidental lock in when the deadbolt

is thrown. Supplied with double euro proﬁle

cylinders with three keys. May be ordered

keyed alike.

Code Free access option via keypad on models

CL605, CL615 & CL625.

Codes

8,191 non sequential codes available

Code storage

Single code

Code change method

On door via key

Key override As standard the lock has a key

override function

Finishes available

PVD (Physical Vapour Deposition) hardwearing

low maintenance ﬁnishes BS (brushed steel)

and PB (polished brass).

Keying alike Locks can be supplied as keyed

alike on request

Key cylinder change From lock front (6 pin)

Neoprene seals are included on both sides to

provide friction against the face of the door

and to prevent damage from over tightening

of the ﬁxing bolts. The outside lever handle

has a slipping clutch to prevent damage to

the lock if the handle is forced.

For internal and external use.

CL610 Mortice Latch

Outside lever handle will retract the latch after

a correct code is entered. The spring loaded

latchbolt will lock automatically when the door

is closed.

CL615 Mortice Latch

As CL610 with Code Free access option on

keypad. In Code Free mode the outside lever

will retract the latchbolt without using a code.

CL600 & CL605 Front & backplates only

NOT ILLUSTRATED

For use with an existing lock or latch.

NB: For CL600 & CL605 existing lock must

have either a ﬁxing hole (22mm

/8”) below

follower (spindle) or two horizontal holes

either side of the follower (38mm 1

/2”

centres)

CL600PK Panic Device Access Kit

NOT ILLUSTRATED

Keypad plate only, supplied with an extra long

spindle to work with most exit devices with

8mm (

/16”) square followers. Stainless Steel

ﬁnish only.

CL620 Full Mortice Lock

with Safety Feature

Outside lever handle will retract the latch after

a correct code is entered. The spring loaded

latchbolt will lock automatically when the

door is closed. Key retracts latchbolt for entry

without using a code. Key controls deadbolt

position. When deadbolt is projected it denies

access by code. When deadbolt is projected

the safety feature allows the inside lever handle

to retract the deadbolt and the latchbolt,

preventing people being accidentally locked in.

CL625 Full Mortice Lock

with Safety Feature

As CL620 with Code Free access function

on the keypad. In Code Free mode the outside

lever will retract the latchbolt without using

a code.

Back to Back

NOT ILLUSTRATED

The CL600 and the CL610/CL615 (Mortice

Latch) may be ordered with two keypad plates

for installation on both sides of the door to

provide coded access in both directions.

Brushed steel ﬁnish only.

CL600

CL605

CL610

CL615

CL620

CL625

Codelocks2010-A5-Inner.indd 50-51 17/2/10 09:20:34

1 2 ... 21 22 23 24 25 26 27 28 29

Kommentare zu diesen Handbüchern

Keine Kommentare

CODELOCKS 5OOO ELECTRONIC Bedienungsanleitung Seite 26

Kommentare zu diesen Handbüchern