CODELOCKS 5OOO ELECTRONIC Bedienungsanleitung PDF herunterladen (Seite 19)

with gasket – wxh:

46mm (1

/5”) x 148mm (5

/8”)

Front Depth off door: 62mm (2

/2”)

Codelocks CL2000 Range

Technical Speciﬁcations

Door thickness 35mm - 65mm (1

/8”-2

/2”)

Spindle type Flat bar spindle

Non handed Lock will ﬁt doors hung on the

left or right

Latch

Light duty with stainless steel latchbolt head,

with “anti-shim” plunger, 60mm (2

/8”) backset

requires 25mm(1”) hole, 82mm (3

/4”) deep.

Also available to order:

– 50mm (2”) backset latch requiring 25 x 72mm

(1” x 2

/8”) hole or

– 70mm (2

/4”) backset latch requiring

25 x 92mm (1” x 3

/16”) hole.

Spindle adaptor

Lock is supplied with an 8mm spindle adaptor

allowing it to be used with existing 8mm (

/16”)

square follower latches

Body material Zinc alloy

Buttons Individual, stainless steel

Operations 80,000

Low battery warning

Red LED will ﬂash on opening to indicate

batteries need to be changed.

Finishes available

PVD (Physical Vapour Deposition) hardwearing

low maintenance ﬁnishes BS (brushed steel)

and PB (polished brass).

REM 1 Lock ﬁtted as standard with remote

release (REM1) terminal. This can be used to open

the lock via remote wired switch (not supplied)

REM 2 Lock ﬁtted as standard with remote

alarm release (REM2) terminal. This can be used

when linked to an alarm system to activate (via

maintained or momentary contact) the lock to the

open state for 30 minutes.

Codes

 •Codesmaybe4,5or6digitslong.Providing

a possible 1,110,000 code combinations.

 •Thelockmemorywillstore80differentUser

Codes.

 •Thelockmemorycanstore10differentOne

Time User Codes.

Code Free Code free mode can be set via the

keypad

Key override As standard the lock has a key

override function

Keying alike Locks can be supplied as keyed

alike on request

Battery override Should batteries fail and key

is misplaced lock can be opened by attaching a

PP3 battery to contact points and entering the

Master code

Batteries

2 x 1.5 v AA Cells

For internal use.

CL2255 Tubular Mortice Latch

Outside knob will not turn unless a valid code is

entered. Spring latch will automatically lock the

door when closed

Programming Options

01 - Enter new User Code

02 - Suspend User Code

03 - Restore User Code

04 - Suspend all User Codes

05 - Restore all User Codes

06 - Set unlock time

07 - One-time User Codes

08 - Set Code Free mode

09 - Cancel Code Free mode

10 - Change Master Code

11 - Cancel emergency open

12 - Delete all User Codes

13 - Set or change Sub-Master Code

14 - Delete Sub-Master Code

15 - LED locked / unlocked status

CL2255

CL2200 Surface Deadbolt

Bolt slides on inside surface of door to lock or

unlock. Bolt is moved manually by means of the

outside knob after code input and freely by the

inside knob at all times. A surface mounted

keep is provided. Stainless Steel ﬁnish only.

CL2210 Mortice Deadbolt NOT ILLUSTRATED

Sizes as CL2255. Bolt extends 25mm (1”)

beyond door edge when locked.

CL2200

Codelocks2010-A5-Inner.indd 36-37 17/2/10 09:20:17

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 28 29

Kommentare zu diesen Handbüchern

Keine Kommentare

CODELOCKS 5OOO ELECTRONIC Bedienungsanleitung Seite 19

Kommentare zu diesen Handbüchern