CODELOCKS 5OOO ELECTRONIC Bedienungsanleitung PDF herunterladen (Seite 25)

Front depth off door: 78mm (3

/12”)

Codelocks CL500 Range

Technical Speciﬁcations

Door thickness 35mm - 65mm (1

/8”-2

/2”)

Spindle type 2 part 8mm (

/16”) spring loaded

spindle

Body material Zinc alloy

Non handed Lock will ﬁt doors hung on the

left or right

Mortice Latch (CL510 & CL515)

Medium duty, stainless steel latchbolt head

with “anti” shim deadlocking plunger, 8mm

(

/16”) follower.

60mm (2

/8”) backset, requires 25mm (1”) hole,

82mm (3

/4”) deep.

70mm (2

/4”) backset, requires 25mm (1”) hole,

92mm (3

/16”) deep.

Mortice Lock (CL520 & CL525)

Euro proﬁle mortice sash lock with deadbolt

and latchbolt. Complete with double cylinder

to control deadbolt and to retract latchbolt.

With the deadbolt locked it denies access to a

code user. The key can be used to open doors

for management functions such as security

and cleaning. The split follower enables the

inside lever to retract the deadbolt and latch to

prevent accidental lock in when the deadbolt

is thrown. Supplied with double euro proﬁle

cylinders with three keys. May be ordered

keyed alike.

Code Free access option via keypad on models

CL505, CL515 & CL525.

Codes

8,191 non sequential codes available

Code storage

Single code

Code change method

Requires removal of lock from door

Finishes available

PVD (Physical Vapour Deposition) hardwearing

low maintenance ﬁnishes SS (stainless steel)

and PB (polished brass).

Neoprene seals are included on both sides to

provide friction against the face of the door

and to prevent damage from over tightening

of the ﬁxing bolts. The outside lever handle

has a slipping clutch to prevent damage to

the lock if the handle is forced.

For internal and external use.

CL510 Mortice Latch

Outside lever handle will retract the latch after

a correct code is entered. The spring loaded

latchbolt will lock automatically when the door

is closed.

CL515 Mortice Latch

As CL510 with Code Free access option on

keypad. In Code Free mode the outside lever

will retract the latchbolt without using a code.

CL500 & CL505 Front & backplates only

NOT ILLUSTRATED

For use with existing lock or latch.

NB: For CL500 & CL505 existing lock must

have either a ﬁxing hole (22mm

/8”) below

follower (spindle) or two horizontal holes

either side of the follower (38mm 1

/2”

centres)

CL500PK Panic Device Access Kit

NOT ILLUSTRATED

Keypad plate only, supplied with an extra long

spindle to work with most exit devices with

8mm (5/16”) square followers.

Stainless Steel ﬁnish only.

CL520 Full Mortice Lock

with Safety Feature

Outside lever handle will retract the latch after

a correct code is entered. The spring loaded

latchbolt will lock automatically when the

door is closed. Key retracts latchbolt for entry

without using a code. Key controls deadbolt

position. When deadbolt is projected it denies

access by code. When deadbolt is projected

the safety feature allows the inside lever handle

to retract the deadbolt and the latchbolt,

preventing people being accidentally locked in.

CL525 Full Mortice Lock

with Safety Feature

As CL520 with Code Free access function

on the keypad. In Code Free mode the outside

lever will retract the latchbolt without using

a code.

Back to Back

NOT ILLUSTRATED

The CL500 and the CL510/CL515 (Mortice

Latch) may be ordered with two keypad plates

for installation on both sides of the door to

provide coded access in both directions

Stainless Steel ﬁnish only.

CL510

CL515

CL520

CL525

Codelocks2010-A5-Inner.indd 48-49 17/2/10 09:20:32

1 2 ... 20 21 22 23 24 25 26 27 28 29

Kommentare zu diesen Handbüchern

Keine Kommentare

CODELOCKS 5OOO ELECTRONIC Bedienungsanleitung Seite 25

Kommentare zu diesen Handbüchern