Codelocks KL1000 KitLock NetCode Locker Lock Bedienungsanleitung PDF herunterladen (Seite 2)

SPECIAL NOTES FITTING INSTRUCTIONS

The KitLock can be tted to:

A Cabinets, cupboards and lockers

etc as a direct replacement for

existing cam locks.

B It can also be fitted easily to

cupboards and cabinets that do not

have an existing locking device.

Please see installation guide on reverse

OPEN

LOCKED

Please read carefully:

• Before installing the lock, load the

batteries and familiarise yourself with

the operation and programming.

• The handle will not turn until you

enter the factory default Master Code

11 33 55 77 or the User Code 22 44.

• Please see programming guide to set

your own codes.

• Your KitLock is supplied ready to

fit to doors up to 19mm (

3

/

4

”) thick.

For doors between 19mm (

3

/

4

”)

and 25mm (1”) thick, you will need

to install the 28.5mm (1

1

/

8

”) spare

spindle (see below). A 12mm (

1

/

2

”)

spindle is also included for sheet

metal doors (see below).

KitLock

Upper fixing bolt x 2

Packer pieces x 3

Locking nut

Cams x 2

Cam fixing bolt

Batteries – 2 x 1.5V AAA

Template x 1

1

2

3

4

5

6

1. Remove the lower 2 fixing

screws.

2. Remove cover plate, spindle

and threaded shaft.

3. Replace with spare spindle

and threaded shaft.

4. Replace cover plate.

1 2

Kommentare zu diesen Handbüchern

Keine Kommentare